1 Set imKey binding code
-
The binding code is used to pair imKey Pro and the client
-
View the binding code displayed on imKey Pro: If your imKey Pro has been paired to the mobile app before, you need to fill in the binding code generated at that time.You can find the binding code in the mobile app
-
Enter the binding code in imKey Manager
-
The binding code is very important for future use. Copy it and keep it safe
2 Set the PIN code
-
Disconnect the USB connection, and set the PIN code
-
The PIN code is used to unlock imKey Pro. The setting requirement is 6-8 digits.
-
Use the up and down buttons to switch the numbers, the OK button to confirm and the C button to cancel
-
Repeat this process until the complete PIN code is selected
-
Input the PIN code again to confirm
-
Safety tip: The PIN code used to unlock imKey Pro. Do not set your PIN code to continuous or repeated numbers, do not use a PIN code from third-party tools
3 Create and backup wallet
-
Select Create Wallet in imKey
-
Keep the USB connection disconnected and select "Create Wallet" on imKey Pro
-
Read the reminder and click OK to confirm
-
Confirm all words are copied in the correct order and accurately
-
The Mnemonics phrase is the only way to restore the wallet. Keep it offline and safe
4 Backup and second verification
-
imKey Pro displays "Please confirm the Mnemonic"
-
Use up and down buttons to select a location corresponding to the correct word and click OK to confirm
-
Repeat this process for all 12 words
-
imKey Pro displays "Creating wallet, estimated 2 min"
5 Security Check
-
Reconnect USB and click "Next Step"
-
Confirm all security check items and confirm, click "Finish"
-
Set up complete. You can start using imKey Manager now